You are here:
Home ccalpsresearch hangar de séchage et de stockage de plaquettes forestières
Navigation
 

drying and storage hangar for wood pads


hangar de séchage et de stockage de plaquettes forestières


This climate response measure was researched by the project team as part of the cc.alps project in 2009.


Villard de Lans, Isère

fr (France)

ongoing



Communauté de communes du massif du Vercors
info@vercors.org
:
Seventy percent of the community of municipalities of the Vercors Massif is covered by forests which can be used as fuel. To organise their production, the municipalites decided to build an intercommunal hangar to stock and to dry wood plates (working since 2006), which allows to guarantee a good quality wood supply.

Mitigation measure
  • technical
  • Energy supply
  • Forestry

regional, small-scale (association of municipalities, valley region, etc.)

wood pellets
communal heating system
local wood

to develop the local timber sector which promotes the local economy

Different public buildings have been equipped with collective heating systems supplied with wood pellets. This is representing an annual consumption of about 15 000 m3 of wood pellets. The wood is stored firstly outside the hangar until a humidity level of 35% is reached. Then it is stored inside the hangar to reach a humidity level of 25% which is enough to make the wood usable as fuel for heating purposes. The wood pellets are then transported to the heating silos.

annual drying capacity of 2000 to 2500 m3 wood pellets

Administration (local, regional, national)

community of municipalities comprising 7 neighbouring villages

Online information on the measure


http://www.vercors.org


Powered by Plone CMS, the Open Source Content Management System

This site conforms to the following standards: